Open

FAQ Lists

Search:
1
How to print the buffer ?
2
Why Superpro/L+ and Z appear the communication error under win2000/XP ?
3
What is ISP programming? How does it work?
4
When viewing devices list, I find one IC has two or more adapters to support. How can I choose?
5
Why it always takes much time to response when programming large-capacity devices such as NANDFLASH?
6
Why my Superpro/9000U can't connect the computer?
7
Why I can't find correct types of EPROM, MCU and PLD by "AUTO DINF DEVICE" function?
8
How can I get the Chinese-language interface?
9
After the first installation of the software, Communication error is reported once on line
10
My programmer is the former, and does not support WINDOWS2000/NT/XP, but I have to use these operating systems, What can I do?
11
My operating system is WINDOWS2000/NT/XP. What type of programmer can be used in such operating system?
12
Chips with DIP package are programmed normally, but with other package like PLCC or QFP there are problems, why?
13
How many times of the adapter can used ?
14
According to the advertisement, SUPERPRO has SRAM test function, but why can't be found in TEST?
15
How to burn two files into one chip?
16
How to burn a 16-bit file into two 8-bit EPROMs respectively by even/odd bytes?
17
Why it can't work on board but verify successfully while burning 87C196XX?
18
Why it can't work on board but verify successfully while burning PIC16CXXX and PHILIPS 89CXXX
19
Why can't find the driver the new USB series programming?
20
In the NANDFLASH read-write programming process prompts Good blocks not enough.
21
In the NANDFLASH regulation prompts Config Error, does not permit the operation

Copyright © 1993-2023. Xeltek Co.,Ltd All rights reserved.

Address :#1, Jiangyun Rd., Jiangning, Nanjing, P.R.China , ZIP 211111