SUPERPRO/7500
USB2.0 Interfaced Ultra-high Speed Stand-alone Universal Device Programmer

eMMC programming speed 10 times higher than SuperPro/5000;Universal package adaptors thanks for 144pin universal Pin-drivers;Engineering and production programmer in one unit. Gang4 adaptors available;PC hosted, network and stand-alone triple modes operation;
Device List

SUPERPRO/7504
USB2.0 Interfaced Extreme-high Speed Universal Device gang Programmer

eMMC programming speed 10 times higher than SuperPro/5000;Universal package adaptors thanks for 144pin universal Pin-drivers;Engineering and production programmer in one unit. Gang4 adaptors available， Max support 16pcs IC in one time.
Device List

SUPERPRO/X108
USB3.0 Interfaced Ultra-high Speed Stand-alone Universal Device Programmer

eMMC programming speed 10 times higher than SuperPro/7500;
Support 8 chips for eMMC, NAND FLASH，SPI FLASH。
Gang2 *4 adaptors available;
Device List

SUPERPRO-SB05
Smart Automation 32Devices 4Nozzles Program System

Four Pick & Place nozzles,Eight socket pressing actuators and 2 tape feeders,High throughput up to 2500 UPH,Embeded with eight ultra-high speed programmers SuperPro/7500,each with up to 4 sockets, totally 32 sockets. Throughput 60 times higher than SuperPro/SB01 for eMMC devices,Supports over 100,000 devices from over 300 IC manufacturers,Supports tray, tape and tube input and output. Supports laser and ink marking,Short change-over time,Intelligent s/w cuts learning curve and setup time, makes task management an easy job,Compact size.
Device List

SUPERPRO-SB05X
Smart Automation 48Devices 4Nozzles Program System

Four Pick & Place nozzles,Eight socket pressing actuators and 2 tape feeders,High throughput up to 2500 UPH,Embeded with eight ultra-high speed programmers SuperPro/X108,each with up to 8 sockets, totally 48 sockets. Throughput 60 times higher than SuperPro/SB01 for eMMC devices,Supports over 100,000 devices from over 300 IC manufacturers,Supports tray, tape and tube input and output. Supports laser and ink marking,Short change-over time,Intelligent s/w cuts learning curve and setup time, makes task management an easy job,Compact size.
Device List

SUPERPRO/IS416
advanced 16Channels in-system programmer

A universal ISP programmer supports devices with almost all serial protocols.Programs up to 16 serial devices simultaneously.Up to 4 parallel devices like eMMC、NAND、NOR FLASH can be programmed in system simultaneously. USB2.0、LAN、SD interfaces. USB or network remote and stand-alone operation modes. DLL/API/Command-Line Commands available under license for integration with ICT, FCT, ATE and testing fixture.
Device List

SUPERPRO-SB06
16-Socket Automated IC Programmer

Superpro 06 is an automatic IC programmer with high performance and reasonable price for large-scale electronic product manufacturing. This programmer can automatically pick up, place, program, take out and pack up chips. With fully automated operation setup capabilities, it can improve working efficiency and minimize human errors.
Device List

SUPERPRO-SB05E
16-Socket Automated IC Programmer

Superpro 5e is an automatic IC programmer with high performance and reasonable price for large-scale electronic product manufacturing. This programmer can automatically pick up, place, program, take out and pack up chips. With fully automated operation setup capabilities, it can improve working efficiency and minimize human errors. Superpro 3 comes with daul pick & place nozzles, 8 independent socket pressing actuators, two CCD cameras and can work with 2 tape feeders. Up to 2000 unites per hour (UPH) for devices with programming time less than 50 sec. Throughput 0.6 to 60 times higher than Superpro-1 especially higher for large capacity devices like eMMC, NAND /NOR FLASH and SPI FLASH. Suitable for both small and large capacity devices.
Device List

SUPERPRO-SB03
Smart 32 Chips Automated Program System

Four Pick & Place nozzles,Eight socket pressing actuators and 2 tape feeders,High throughput up to 1600 UPH,Embeded with eight ultra-high speed programmers SuperPro/7500,each with up to 4 sockets, totally 32 sockets. Throughput 60 times higher than SuperPro/SB01 for eMMC devices,Supports over 80,000 devices from over 300 IC manufacturers,Supports tray, tape and tube input and output. Supports laser and ink marking,Short change-over time,Intelligent s/w cuts learning curve and setup time, makes task management an easy job,Compact size.
Device List

SUPERPRO-SB04
16-Socket Concurrent Programming with a SIngle Tray

SuperBot4 is a single tray automated desktop programming system designed for low to medium volume IC programming. It can accommodate 4-16 socket adapters depending on programming volume needed. A nozzle picks up a blank chip from a tray, programs it, and puts back in the empty space in the same tray. When all the chips are programmed it will stop and the operator needs to replace with another blank chip tray. With a low-noise vacuum generator built in, either AC 110V(50Hz/60Hz) or 220V(50Hz/60Hz) power needs to be supplied. A laptop PC needs to be connected for operation. At 600 UPH max rate, it can easily program more than 10,000 chips/week. It accepts only tray and tape is not supported.
Device List

SUPERPRO-XPS01
ISP Gang Program Manual Station

 SUPERPRO/XPS01 In-System Programming Station is an excellent total solution for PCB board in-system programming. Multiple SUPERPRO® / IS0 16-CH ISP programmers, test fixture, customized needle board, carrier board and pressure board are integrated into one system. The system is controlled by a PC via USB or LAN to perform programming to multi-board panels. XPS01 is a turn-key product and customers can start his production task right away without further developing.   
Device List

SUPERPRO-XPS02
ISP Gang Program Station

 SUPERPRO/XPS02 In-System Programming Station is an excellent total solution for PCB board in-system programming. Multiple SUPERPRO® / IS416 16-CH ISP programmers, test fixture, customized needle board, carrier board and pressure board are integrated into one system. The system is controlled by a PC via USB or LAN to perform programming to multi-board panels. XPS02 is a turn-key product and customers can start his production task right away without further developing.   
Device List

SUPERPRO/6100N
USB2.0 Interfaced Ultra-high Speed Stand-alone Universal Device Programmer

The most powerful device programmer in device support you can find in the world;High programming speed;Universal package adaptors thanks for 144pin Universal Pin-drivers;PC hosted and stand-alone dual modes operation;Free software update;
Device List

SUPERPRO/610p
USB Interfaced Ultra-high Device Programmer

An economical universal programmer. adopt SUPERPRO/6000's kernel, DIP48 full-driver interface.
Device List

SUPERPRO/6104A+
Ultra-high-speed Intelligent Universal Gang Programmer

Ultra-high speed universal concurrent gang programmer, built with 144 universal pin-drivers.four independent universal programming modules in one unit.
Device List

SUPERPRO/6104N
Ultra-high-speed Intelligent Universal Gang Programmer

Ultra-high speed universal concurrent gang programmer, built with 144 universal pin-drivers.four independent universal programming modules in one unit.
Device List

SUPERPRO/IS01
Advanced ISP programmer

IS01 is a multi-function, high-speed professional universal ISP programmer. It supports almost all kinds of serial programmable devices.
Device List

SUPERPRO-SB02
Smart 16 sites Automation Desktop Program System

--
Device List

SUPERPRO/FT01
FTDI specific programmer

SUPERPRO ® /FT01  FTDI specific programmer, for FTDI USB interface MCU program。supported FT245R,FT245L,FT232R,FT232L,FT232H,FT2232H,FT4232H,FT2232D,FT232B,FT245B,FT8U232AM,FT8U245AM,FT8U100AX

Device List

Socket Adapter

Optional module
Package:SDIP, PLCC, SOIC, TQFP, PQFP, SOP, TSOP, PSOP, TSSOP, BGA, QFN, ...
 Device Support Search