SUPERPRO/6100N
The most powerful device programmer in device support you can find in the world;High programming speed;Universal package adaptors thanks for 144pin Universal Pin-drivers;PC hosted and stand-alone dual modes operation;Free software update;
SUPERPRO/7500N
eMMC programming speed 10 times higher than SuperPro/5000;Universal package adaptors thanks for 144pin universal Pin-drivers;Engineering and production programmer in one unit. Gang4 adaptors available;PC hosted, network and stand-alone triple modes operation;
SUPERPRO-SB05A
Four Pick & Place nozzles,Eight socket pressing actuators and 2 tape feeders,High throughput up to 2500 UPH,Embeded with eight ultra-high speed programmers SuperPro/7500,each with up to 4 sockets, totally 32 sockets. Throughput 60 times higher than SuperPro/SB01 for eMMC devices,Supports over 100,000 devices from over 300 IC manufacturers,Supports tray, tape and tube input and output. Supports laser and ink marking,Short change-over time,Intelligent s/w cuts learning curve and setup time, makes task management an easy job,Compact size.
SUPERPRO-SB05E
Superpro 5e is an automatic IC programmer with high performance and reasonable price for large-scale electronic product manufacturing. This programmer can automatically pick up, place, program, take out and pack up chips. With fully automated operation setup capabilities, it can improve working efficiency and minimize human errors. Superpro 3 comes with daul pick & place nozzles, 8 independent socket pressing actuators, two CCD cameras and can work with 2 tape feeders. Up to 2000 unites per hour (UPH) for devices with programming time less than 50 sec. Throughput 0.6 to 60 times higher than Superpro-1 especially higher for large capacity devices like eMMC, NAND /NOR FLASH and SPI FLASH. Suitable for both small and large capacity devices.
SUPERPRO-SB02
--
SUPERPRO/IS416N
A universal ISP programmer supports devices with almost all serial protocols.Programs up to 16 serial devices simultaneously.Up to 4 parallel devices like eMMC、NAND、NOR FLASH can be programmed in system simultaneously. USB2.0、LAN、SD interfaces. USB or network remote and stand-alone operation modes. DLL/API/Command-Line Commands available under license for integration with ICT, FCT, ATE and testing fixture.
SUPERPRO/IS01
IS01 is a multi-function, high-speed professional universal ISP programmer. It supports almost all kinds of serial programmable devices.
SUPERPRO-XPS02
SUPERPRO/XPS02 In-System Programming Station is an excellent total solution for PCB board in-system programming. Multiple SUPERPRO® / IS416 16-CH ISP programmers, test fixture, customized needle board, carrier board and pressure board are integrated into one system. The system is controlled by a PC via USB or LAN to perform programming to multi-board panels. XPS02 is a turn-key product and customers can start his production task right away without further developing.
SUPERPRO-XPS01
SUPERPRO/XPS01 In-System Programming Station is an excellent total solution for PCB board in-system programming. Multiple SUPERPRO® / IS0 16-CH ISP programmers, test fixture, customized needle board, carrier board and pressure board are integrated into one system. The system is controlled by a PC via USB or LAN to perform programming to multi-board panels. XPS01 is a turn-key product and customers can start his production task right away without further developing.
SUPERPRO/6104N
Ultra-high speed universal concurrent gang programmer, built with 144 universal pin-drivers.four independent universal programming modules in one unit.
SUPERPRO/7504N
eMMC programming speed 10 times higher than SuperPro/5000;Universal package adaptors thanks for 144pin universal Pin-drivers;Engineering and production programmer in one unit. Gang4 adaptors available， Max support 16pcs IC in one time.
SUPERPRO/610p
An economical universal programmer. adopt SUPERPRO/6000's kernel, DIP48 full-driver interface.
