SUPERPRO/7504N

eMMC programming speed 10 times higher than SuperPro/5000;Universal package adaptors thanks for 144pin universal Pin-drivers;Engineering and production programmer in one unit. Gang4 adaptors available， Max support 16pcs IC in one time.

Key Features:

• As of today, supports 735 manufacturers, 145831 programmable devices.

Mass production programmer for high production capacity, high versatility and high yield Built in 4 Superpro/7500N programmer modules representing the industry'speak level, up to 16 chips can be programmed at the same time. Supports almost every device you can see with extraordinary programming speed, including eMMC, NAND FLASH, SPI FLASH, NOR FLASH, MCU, CLPD, etc. If you are an industry leader, you need a programmer with high throughput, high programming yield and quality, a wide range of supported devices, and the ability to quickly upgrade to support future new devices.




Characteristics

• Built-in 4 asynchronous high-speed programmer modules representing the industry's peak level. SuperPro/7504N. Supporting up to 16 chips for simultaneous programming is the best choice for manufacturers with high productivity, high versatility and high quality.
• Supports almost any device, including EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA, PROM, FLASH (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, etc. Support device voltage as low as 1.2V. Support device packages including but not limited to DIP, SDIP, PLCC, JLCC, PGA, LGA, SOIC, SOJ, SOT, QFP, TQFP, PQFP, VQFP, MQFP, LQFP, TSOP, SOP, TSOPII, PSOP, SSOP, TSSOP, SON , EBGA, FBGA, FTBGA, VFBGA, μBGA, CSP, SCSP, QFN, HVQFN, etc.
• Programming eMMC, NAND FLASH, SPI FLASH and other devices are faster.
• Optional adapter pressurization booster, it is more labor-saving to pick and place the chip.
• Support all kinds of popular NAND FLASH Platforms and can be customized.
• The tenth generation of pin drive technology ensures a cleaner signal, a wider voltage range and a higher signal bandwidth. With the strict compliance with the chip manufacturer's specifications, the algorithm software that accurately implements the timing specified by the IC manufacturer ensures a very high programming yield.
• Comprehensive security mechanisms to protect chips and programmers. Features include hardware self-test, voltage auto-calibration, chip mis-insertion detection, overcurrent detection, overvoltage protection, etc.
• USB2.0 Communication interface.
• Powerful and rich software features:
• Project file The operator only needs to load the project file to start programming.
• Password managementProject files and production control can be password protected.
• Complete run log files and statistics Production quality tracking.
• Support Win7/ Win 8/ Win 10/Win11 32/64bit
Standard Packing

• SuperPro /7504N Host
• Power adapter
• USB 2.0 Cable

Options

• Various package adapters.
• Adapter pressure booster and various specifications of pressure plate.

Certificates

Specifications:

• Device Support: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND)n, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU.
• Package Support: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, ...
• Communication Interface: USB2.0
• Standalone Mode: Not available
• Power Supply: Input AC 100-240V; Output 12V/7A, Power: -W
• Unit Dimensions: 540 x 216 x 75 mm Weight: 6.8 Kgkg
• Packaging Dimensions: 600 x 250 x 105 mm mm; Gross Weight: 9.2 Kgkg
• Standard Configuration:
  • Main unit, AC adaptor, USB2.0 cable, register card
  • Optional accessories: ZIF48 Socket, adaptor in varies packages, Sockets assistor