SUPERPRO-SB02

--

Key Features:

Features:

High throughput：High performance servo system, up to 1100 UPH for devices with programming time less than 36 sec.Throughput 0.6 to 30 times higher than SuperPro/SB01,especially higher for large capacity devices like eMMC, NAND/NOR FLASH,SPI FLASH. Suitable for both small and large capacity devices.

Accurate positioning：Equipped with high performance servo system, precise CCD cameras for sockets / pick & place spots positioning.

High performance programmers：4 ultra-high speed universal gang programmers SuperPro/7500 resident. Each with up to 4 sockets, totally up to 16 sockets in the system.

Varied I/O devices：Supports tray, tape and tube input and output. Supports laser and ink marking. Supports packing conversion. Can perform as a packing conversion machine alone.

Short change-over time：I/O devices and socket adaptor are easy to be changed when programming task need to be changed. Socket positioning can be performed automatically. Projects can be loaded automatically with barcode scanning.

Powerful and intelligent software：Setup data saved for next operation, log file and statistic reports for quality and yield traceability, flexible sockets prohibition strategy promises high yield rate for unattended operation, graphical user interface cuts learning curve, prevents chip over-lapping by socket checking before chip placing.

Remote Control：Remote project loading, quality monitoring,volume control, file security.

 

Motion Sytem

High precision servo drive system.

Resolution: X axis：±0.02mm；Y axis：±0.02mm；

Z axis：±0.02mm; θaxis: ±0.1°

Stroke： X axis：1000mm；Y axis：500mm；Z axis：40mm。

Pick & Place header accuracy：±0.07mm。

Operable chip size: min: 2x2mm; max: 25x25mm

Maximum throughput：1100 UPH。

 

Vision Sytem

Downward CCD camera for sockets / pick & place spots

positioning. 512×512 pixels。

Field of view：30mmX30mm

Vision accuracy： △x=△y=0.07 mm, △θ=0.1°

 

Programmer

Four ultra-high speed universal gang programmers SuperPro/7500 resident. Speed much higher than SuperPro/5000. Each with up to 4 sockets, totally up to 16 sockets in the system. Supports device voltages as low as 1.2V Capable to support MCU, CPLD, serial and parallel NOR/NAND FLASH. Pay for algorithm you need only.

 

Control System

Built-in Industrial PC with OS Windows7, 19” LCD display,

keyboard and mouse. Communication interface: USB and LAN.

 

I/O Devices

l  Manual Tray (Standard equipped)

One tray each time. Change tray manually.

l  Tape-out Device

Heat sealing and pressure sealing modes. Tape width adjustablebetween 8 and 32mm.

l  Tape-In Device

Electric Tape feeder。Tape width between 8 and 32mm applicable.

l  Auto Tray Device

Moves blank tray in and passed tray out the machine automatically, marking the tray (optional). Stack up to 20 JEDEC trays.

l  Tube-In Device

Moves chips in the machine. Chip guider for different chip width optional.

l  Tube-Out Device

Moves chips out the machine. Chip guider for different chip width optional.

l  Tape Ink-Marker

An attachment to the tape-out device. Put a ink dot on the chip.

l  Auto Tray Ink-Marker

An attachment to the auto tray device. Scan and put dots on the passed chips.

l  Laser-Marker

An optional attachment to the tape-out or the auto tray device. Marks up to 4 characters on the passed chips.

 

Accessories

Programming adaptors, nozzles, socket pressing adaptors.

 

Electrical and Mechanical Specification

Power Supply：AC 200～240V/50～60Hz, single phase

Power Consumption：1.5KVA。

Air: Clean, pressure：0.6MPa, consumption：30 liter/min.

Size: Main machine: 820(L)×640(W)×1550(H)

mm Auto tray： 1100（L）×380(W)×1300(H)

Tape-out： 1100(L)×380(W)×1300(H)

Weight： Main machine: 250

Kg Auto tray： 80

Tape-out： 50

Specifications:

• Device Support: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND)n, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU .
• Package Support: PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP，..
• Communication Interface: USB2.0,LAN
• Standalone Mode: Not available
• Power Supply: Input AC 100-240V; Output AC 220V , Power: 2KW
• Unit Dimensions: 820*640*1550 Weight: 248kg
• Packaging Dimensions: - mm; Gross Weight: -kg
• Standard Configuration:
  • MainUnit (contain 4 unit SUPERPRO/7500 programmer), Industrial Personal Computer, User's Guid, Warranty Card.
  • Optional Accessories: Auto/Half-Auot Tray In/Out ,Tape In/Tape out ，Tube In/Out Device, Adapter;