Automatic Programmers:
There are 7 Programmers have been found:
SUPERPRO-SB05A
Smart Automation 32Devices 4Nozzles Program System
Four Pick & Place nozzles,Eight socket pressing actuators and 2 tape feeders,High throughput up to 2500 UPH,Embeded with eight ultra-high speed programmers SuperPro/7500,each with up to 4 sockets, totally 32 sockets. Throughput 60 times higher than SuperPro/SB01 for eMMC devices,Supports over 100,000 devices from over 300 IC manufacturers,Supports tray, tape and tube input and output. Supports laser and ink marking,Short change-over time,Intelligent s/w cuts learning curve and setup time, makes task management an easy job,Compact size.Device Supported List
SUPERPRO-SB05X
Smart Automation 48Devices 4Nozzles Program System
Four Pick & Place nozzles,Eight socket pressing actuators and 2 tape feeders,High throughput up to 2500 UPH,Embeded with eight ultra-high speed programmers SuperPro/X108,each with up to 8 sockets, totally 48 sockets. Throughput 60 times higher than SuperPro/SB01 for eMMC devices,Supports over 100,000 devices from over 300 IC manufacturers,Supports tray, tape and tube input and output. Supports laser and ink marking,Short change-over time,Intelligent s/w cuts learning curve and setup time, makes task management an easy job,Compact size.Device Supported List
SUPERPRO-SB06
16-Socket Automated IC Programmer
Superpro 06 is an automatic IC programmer with high performance and reasonable price for large-scale electronic product manufacturing. This programmer can automatically pick up, place, program, take out and pack up chips. With fully automated operation setup capabilities, it can improve working efficiency and minimize human errors.Device Supported List
SUPERPRO-SB05E
16-Socket Automated IC Programmer
Superpro 5e is an automatic IC programmer with high performance and reasonable price for large-scale electronic product manufacturing. This programmer can automatically pick up, place, program, take out and pack up chips. With fully automated operation setup capabilities, it can improve working efficiency and minimize human errors. Superpro 3 comes with daul pick & place nozzles, 8 independent socket pressing actuators, two CCD cameras and can work with 2 tape feeders. Up to 2000 unites per hour (UPH) for devices with programming time less than 50 sec. Throughput 0.6 to 60 times higher than Superpro-1 especially higher for large capacity devices like eMMC, NAND /NOR FLASH and SPI FLASH. Suitable for both small and large capacity devices.Device Supported List
SUPERPRO-SB03
Smart 32 Chips Automated Program System
Four Pick & Place nozzles,Eight socket pressing actuators and 2 tape feeders,High throughput up to 1600 UPH,Embeded with eight ultra-high speed programmers SuperPro/7500,each with up to 4 sockets, totally 32 sockets. Throughput 60 times higher than SuperPro/SB01 for eMMC devices,Supports over 80,000 devices from over 300 IC manufacturers,Supports tray, tape and tube input and output. Supports laser and ink marking,Short change-over time,Intelligent s/w cuts learning curve and setup time, makes task management an easy job,Compact size.Device Supported List
SUPERPRO-SB04
16-Socket Concurrent Programming with a SIngle Tray
SuperBot4 is a single tray automated desktop programming system designed for low to medium volume IC programming. It can accommodate 4-16 socket adapters depending on programming volume needed. A nozzle picks up a blank chip from a tray, programs it, and puts back in the empty space in the same tray. When all the chips are programmed it will stop and the operator needs to replace with another blank chip tray. With a low-noise vacuum generator built in, either AC 110V(50Hz/60Hz) or 220V(50Hz/60Hz) power needs to be supplied. A laptop PC needs to be connected for operation. At 600 UPH max rate, it can easily program more than 10,000 chips/week. It accepts only tray and tape is not supported.Device Supported List